Radioenheter

Åkerströms Sesam 800 Mobile

Sesam 800 Mobile is a very robust system specially developed for smaller mobile applications such as tail lift lifts and winches for quad bikes and forest machines. The system is IP67-rated, which means that it can handle large stresses with dust and moisture without problems.
Developed for extreme environments where high demands are placed on vibration and shock sensitivity

• Waterproof and dustproof design of transmitter and receiver (IP67)
• Automatic frequency selection of 12 frequencies
• Duplex (two-way communication) with acknowledgment function
• Two functions + a main relay
• Extremely fast response time
• Receiver with fiberglass-reinforced enclosure and equipped with a diaphragm valve
• Transmitter in shock-resistant and modern design
• Robust, easy-to-operate buttons (even with gloves) that can handle over one million prints

Learning of Transmitter If any part of the system has been replaced, the receiver and transmitter will need to be paired together.

Remove the plastic caps on the back of the receiver to reach the screws and disassemble. Press the button ”ON” on the transmitter until the green indicator lights. The transmitter is now active. Press the Learn/Erase button on the receiver until LED 7 is ON. (Fig. 2) The Learn Mode will be active for 10 seconds (as long as LED 7 is ON). Press transmitter button 1 ”IN” to pair the transmitter to the receiver. LED 7 (fig. 2) blinks three times if the learning has succeeded. Install the receiver cover and tighten the six screws to 2.0 Nm Mount the caps over the screws.

Sesam 800 2+2 kanaler

Mittenknapp på sändare on/off. För styrning av två dubbelverkande funktioner

Sesam 800 Configurable is a robust configurable radio control system for industrial and mobile applications. The system is suitable for an infinite number of uses. Some examples of common applications are conveyor belts, water pumps, anchor winches and various on / off functions for lighting, fans, etc.

Kontakt AMP hona-hane med kabel för inkoppling ex. radio.
Diod monterade. Viktigt kabel/stift 1 är +plus och 2 är -minus.